Seen here is the new passing loop and siding being installed at the DPLRailway in Nov 2016.
This weekend 26/11/16 the point levers were installed apart from the siding one so we had a little run with a 3 1/2" and 5"
gauge loco to check all the poinwork etc.
3” Scale Burrell Agricultural Engine
One of the Club’s current projects is a 3” Scale Burrell Traction Engine. The engine was given to the Society after one of our members sadly passed away. The engine had been purchased from Station Road Steam and described as follows: Without any doubt whatsoever, this is the most horrendous looking Burrell I have seen that remains in one piece. Built in the 1970s, the owner inherited it from his grandfather many years ago”
This is what the engine looked like when originally purchased.
When given to the Society in 2012 it had already been stripped because the original steel boiler was deemed as scrap. Initially we found a part built copper boiler on Ebay which we were able to acquire but in hindsight we should have started from scratch because we ended up making many of the parts again.
By 2015 apart from continuing to work on the boiler we had completed a new smokebox, smokebox door & ring and mounted the original perch bracket and chimney to the new smokebox. However, we were starting to have issues with the Society’s riding cars for our 5” gauge railway so they took priority and work on the Burrell slowed up.
With renewed enthusiasm within 2017 we have completed the boiler which is now being machined ready to accept the horn plates. Also the rear wheels have been trued in the lathe and now fitted with a steel band and rubber tyres. At the same time the front wheels have also had rubber tyres fitted. The following pictures show the newly tyred wheels.